011462 SIP Armored Steel Ringdown Phone



CyberData’s SIP Armored Steel Ringdown Phone is a PoE powered IP phone for environmentally demanding installations.
Powder coated with stainless steel hardware for corrosion resistance.
Fully compatible with most on-premise and hosted IP-PBX systems, the CyberData SIP Armored Steel Ringdown Phone provides a heavy duty and industrial option for your VoIP project.



► PoE 802.3af enabled (Power-over-Ethernet)
► Corrosion protected and powder coated
► Heavy duty G Type industrial handset
► Vandal resistant armored handset cord with lanyard
► Magnetic reed hook switch to reduce parts subject to wear
► Surge arrestor to prevent voltage spike damage
► Easy support drill guides for top and bottom mount glands
► Electronic ringer
► Hearing aid compatible and receiver volume adjustment
► Electret noise reducing microphone for clear communication
► Concurrent SIP call and multicast paging
► Supports SRST (Survivable Remote Site Telephony) in a Cisco environment
► Network web management and firmware download


Ethernet I/F:
10/100 Mbps

SIP RFC 3261 Compatible

Power Input:
PoE 802.3af compliant or +24 VDC @ 1000mA Regulated Power Supply

On-Board Relay:
1A at 30 VDC

Water/Dust Tight Enclosure: Type 4X and IP66

-40° to +140°F (-40° to + 60°C)

0-95% RH Non-Condensing

Dust Resistant:
Full Gasket Faceplate

Storage Temperature:
-40 degrees C to 70 degrees C (-40 degrees F to 158 degrees F)

Storage Altitude:
Up to 15,000 ft. (4573 m)

IP Rating:

Payload Types:
G711 A-Law and u-Law, G.722

(**Dimensions are measured from the perspective of the product being upright with the front of the product facing you.)
Length: 5.0 inches [127 mm], Width: 5.1 inches [130 mm], Height: 9.0 inches [229 mm]

Weight / Boxed Weight:
4 lbs (1.82 kg) / 6 lbs (2.7 kg)

CE; EMC Directive – Class A EN 55032 & EN 55024, LV Safety Directive – EN 60950-1, RoHS Compliant, FCC; Part 15 Class A, Industry Canada; ICES-3 Class A, IEEE 802.3 Compliant

2 years limited

Part Number: